Advertisement
THANK YOU FOR
CHOOSING ROBOTIQ
This step-by-step guide will allow you to install and
use your Hand-E Gripper on e-Series Universal
Robots.
1.WHAT IS SUPPLIED?
Standard upon delivery of a Universal Robots kit:
Hand-E
(GRP-ES-CPL-062)
Gripper Coupling
(HND-TIP-START-KIT)
Fingertip Starting Kit
(GRP-ES-CPL-PRO)
Connection Protector Kit
USB Stick
Necessary Hardware
2.TOOLS YOU NEED
3 mm
4 mm
Hex Key
Hex Key
3.GET THE LATEST
Visit: support.robotiq.com
• Get the up-to-date instruction manual (PDF or web browser).
• Get the corresponding Robotiq_Grippers-X.X.X.urcap.
• Download the .urcap file on a USB stick.
!
PLEASE READ THE INSTRUCTION MANUAL
BEFORE OPERATING THE GRIPPER.
4.MOUNTING
• Mount the coupling (GRP-ES-CPL-062) on your robot
arm. Align with the provided dowel pin.
• Secure using the provided M6 screws and tooth lock
washers.
• Mount the Gripper (HND-GRP) on the coupling.
Align with the dowel pin.
• Secure using the provided M5 screws and tooth lock
washers.
• Plug the coupling's cable in the robot's wrist connector.
(HND-GRP)
• Cover the connection using the protector and the
provided M4 screws.
(M5 screws
and washers)
(M6 screws
and washers)
(Dowel pin)
(M4 screws)
(Connection
protector*)
(Coupling cable)
* Select the connection protector corresponding to your robot
model in the GRP-ES-CPL-PRO kit.
5.SOFTWARE INSTALLATION
• Have a USB stick that contains the .urcap file (step 3).
• Insert the USB stick in the robot's teach pendant.
• Tap the triple bar icon in the upper right corner and select
the System menu on the left.
• Tap the URCaps submenu and then tap the + sign at the
bottom of the screen.
• Open Robotiq_Grippers-X.X.X.urcap.
• Tap the Restart button to activate the URCap.
6. ACTIVATE
Gripper Activate Node
• Tap the Installation button at the top of the screen.
• Tap the URCaps button in the navigation pane on the left.
• Select Gripper in the dropdown list.
• Go to the Dashboard tab.
(Gripper)
• Check the Gripper is connected to the wrist checkbox.
• Tap the Scan button to locate any connected Gripper.
CAREFUL !
FRAGILE PINS
(Gripper coupling)
• Once the Gripper is located, tap the Activate button.
• Tap the UR+ button to expand the Gripper Toolbar.
• The Gripper toolbar allows you to jog and test the
Gripper. For more information, refer to the
instruction manual.
THE GRIPPER
Advertisement
Table of Contents
Related Manuals for ROBOTIQ E Series
Summary of Contents for ROBOTIQ E Series
- Page 1 • Have a USB stick that contains the .urcap file (step 3). arm. Align with the provided dowel pin. CHOOSING ROBOTIQ • Insert the USB stick in the robot’s teach pendant. • Tap the triple bar icon in the upper right corner and select •...
- Page 2 • Tap the Continue button. • The user is then asked to fully open the Gripper. • Measure the distance between the fingers/fingertips and enter the measurement in the elearning.robotiq.com appropriate box. • Tap the Continue button to complete the Calibration wizard.
Need help?
Do you have a question about the E Series and is the answer not in the manual?
Questions and answers