Bluetooth Settings For Nap Mode - HMS Anybus Wireless Bolt Serial User Manual

Configure Settings in the Built-In Web Interface

5.9.11. Bluetooth Settings for NAP Mode

Figure 17. Bluetooth Settings page
Bluetooth Settings for NAP Mode
Setting Description
Bridge Mode Standard: Default mode. Layer 3 IP forward = IP data will be bridged over Bluetooth.
This mode must be used when connecting to an Android device over Bluetooth.
The network must have an active DHCP server.
List Nearby Devices Scans the network and lists discoverable Bluetooth devices.
Pairing cannot be initiated in NAP mode.
SCM-1202-143 2.0
® ™
Anybus Wireless Bolt Serial
Page 31 of 60