Fuses - BMW S 1000 RR Rider's Manual

Charging battery
Disconnecting battery from
motorcycle ( 182).
Charge battery using a suitable
charger.
Comply with operating instruc-
tions of charger.
Once battery is fully charged,
disconnect charger's terminal
clips from battery terminals.
NOTICE
In the case of longer periods
when the motorcycle is not be-
ing used, the battery must be
recharged regularly. See the
instructions for caring for your
battery. Always fully recharge
the battery before returning it to
use.
Connecting battery to vehicle
( 182).
Removing battery
Remove rider's seat (
Disconnecting battery from
motorcycle ( 182).
Lift battery up and out, using
tilting movements if it is difficult
to move.
Install battery
NOTICE
If the motorcycle was
disconnected from the battery
for a longer time, the current
date must be entered in the
instrument cluster to ensure the
proper operation of the service
display.
Consult a certified service fa-
cility, preferably an authorized
BMW Motorrad retailer, for set-
ting of the date.
Place battery in battery com-
partment, positive terminal on
59).
right in direction of travel.
Place battery in battery com-
partment, negative terminal on
left in direction of travel.
Connecting battery to vehicle
( 182).
Installing rider's seat (
Set clock (

Fuses

Removing fuse
ATTENTION
Bypassing defective fuses
Risk of short circuit and fire
Do not bypass defective fuses.
Replace defective fuses with
new fuses.
Switch off ignition.
9
183
59).
48).
z