BMW S 1000 RR Rider's Manual page 178

9
176
Remove light source 4 from
socket.
Replace defective light source.
z
Bulb for parking light
W5W / 12 V / 5 W
To prevent contaminants from
being deposited on the glass
surface, always use a clean, dry
cloth to hold the light source.
Insert light source 4 in light
source socket.
Insert socket 3 in headlight
housing, continuing to apply
pressure until retainer 2 en-
gages.
Install cover.
Replacing front and
rear turn indicator light
sources
Park motorcycle, ensuring that
support surface is firm and
level.
Switch off ignition.
Remove the screw 1.