BMW S 1000 RR Rider's Manual page 134

with anti-theft alarm system
7
(DWA) OE
132
Install bracket 3 for the anti-
theft alarm system.
Install expanding rivet 2.
Fasten plug connection 1 for
z
license-plate carrier.
Insert anti-theft alarm sys-
tem 2; attach in bracket 3.
Fit the screw 4.
Connect plug connection 1 for
anti-theft alarm system.
Work the plug connection 1
with the cable through the
lower rear section 2.
Connect plug connection 1,
position and secure with cable
strap (arrow).
NOTICE
If the lamp defect warning
message for racetrack use
is suppressed in the display,
this must be activated in the
SETUP MENU
under the
EQIP WARN LAMP
before the motorcycle is put into
operation in road traffic .
function