Yamaha RCX340 User Manual page 24

SI monitor
■
Name on/off
Save name Reload name
9
Name on/off
Save name
Reload name
Check name
I/O name entry field
* For a list of reserved words and system variables, and for usage examples of variable names, refer to "13. Reserved word list."
SIW monitor
■
Display unit
20
Check name
Shows/hides the name.
Sends the name that is entered in the name entry field to the controller.
Loads the name from the controller, updating the indication of the name entry field.
Checks whether the entered I/O name conforms to the prescribed rules. For details on the naming
rules for an I/O name, see "I/O name entry field" below.
Enters the I/O name. Observe the following naming rules when entering the name.
• The maximum is 16 characters.
• Single-byte alphanumeric characters and "_" (underscore) can be used.
• Uppercase and lowercase alphabetical characters are distinguished.
• A numeral cannot be used as the first character.
• It is not possible to assign an I/O name that is identical to a reserved word, or that starts with
a system variable name.
• It is not possible to assign the same I/O name to more than one I/O.
• Since SI00-07 and SI10-17 are dedicated bit inputs, the I/O name cannot be input. Similarly, I/O
name input is not possible for DI inputs (DI00-07 and DI10-17).
Display unit
Displays port values in hexadecimal or decimal.
If the name is hidden
I/O name entry field Name on/off
Function
Function