Target Audience; Exclusion Of Liability; Quick Reference Guide For Taking A Safety Function Into Use; Related Manuals - ABB ACS880 User Manual

12 Introduction to the manual

Target audience

This manual is intended for people who install, commission, use and service the safety
function. Read the manual before working on the unit. You are expected to know the
fundamentals of electricity, wiring, electrical components, electrical schematic symbols, and
functional safety.

Exclusion of liability

ABB is not responsible for the implementation, verification and validation of the overall safety
system. It is the responsibility of the system integrator (or other party) who is responsible
for the overall system and system safety.
The system integrator (or other responsible party) must make sure that the entire
implementation complies with the instructions in this manual, all relevant standards, directives
and local electrical code, and that the system is tested, verified and validated correctly.

Quick reference guide for taking a safety function into use

Task
Connect the user-defined wiring (if any). Refer to the wiring instructions in this manual and the circuit
diagrams delivered with the drive.
Check and/or set the safety function related parameters (as listed in this manual).
Do the validation test to make sure that the implemented system meets the safety requirements. You
can find the instructions for the validation test in this manual and in the FSO module user's manual.
Document the validation test procedure. You can find the guidelines for the validation test report in this
manual and in the FSO module user's manual.

Related manuals

Manual
Drive hardware
ACS880 multidrive cabinets mechanical installation instructions
ACS880 liquid-cooled multidrive cabinets mechanical installation instructions
ACS880 multidrive cabinets and modules electrical planning instructions
ACS880 liquid-cooled multidrive cabinets and modules electrical planning
Supply units
ACS880-207 IGBT supply units hardware manual
ACS880-207LC IGBT supply units hardware manual
ACS880-307...+A003 diode supply units hardware manual
ACS880-307...+A018 diode supply units hardware manual
ACS880-307LC...+A018 diode supply units hardware manual
ACS880-907 regenerative rectifier units hardware manual
Inverter hardware
ACS880-107 inverter units hardware manual
ACS880-107LC inverter units hardware manual
Drive firmware
ACS880 primary control program firmware manual
Code
3AUA0000101764
3AXD50000048635
3AUA0000102324
3AXD50000048634
3AUA0000130644
3AXD50000174782
3AUA0000102453
3AXD50000011408
3AXD50000579662
3AXD50000020546
3AUA0000102519
3AXD50000196111
3AUA0000085967