To Know The Operating Status At The Occurrence Of Alarm - Mitsubishi FR-E520-0.1KN Instruction Manual

FR-PU04 Indication
Name
Description
Check point
Corrective action

5.1.3 To know the operating status at the occurrence of alarm

When any alarm has occurred, the ALARM lamp is lit. When the parameter unit
(FR-PU04) is used, the PU display automatically switches to the indication of the
corresponding protective function (error) and shows the error definition and output
frequency.
PS
PU stop
A stop made by pressing the
set in Pr. 75 "PU stop selection".
Check for a stop made by pressing the
operation panel during external operation.
Refer to page 102.
147
PROTECTIVE FUNCTIONS
STOP
key of the PU has been
RESET
STOP
RESET
key of the
5