What's Next - Cisco Firepower 1010 Getting Started Manual

Threat Defense Deployment with the Device Manager
firepower(local-mgmt)# shutdown
This command will shutdown the system.
Please enter 'YES' or 'NO': yes
INIT: Stopping Cisco Threat Defense......ok
Step 3 Monitor the system prompts as the firewall shuts down. You will see the following prompt:
System is stopped.
It is safe to power off now.
Do you want to reboot instead? [y/N]
Step 4 You can now unplug the power to physically remove power from the chassis if necessary.

What's Next?

To continue configuring your threat defense, see the documents available for your software version at
the Cisco Firepower
For information related to using the device manager, see
for Firepower Device
Continue?
Documentation.
Manager.
Cisco Firepower Threat Defense Configuration Guide
Cisco Firepower 1010 Getting Started Guide
What's Next?
Navigating
115