Cisco Firepower 1010 Getting Started Manual page 90

What's Next?
Procedure
Step 1
Choose Devices > Device Management.
Step 2 Next to the device that you want to restart, click the edit icon (
Step 3
Click the Device tab.
Step 4 Click the shut down device icon (
Step 5
When prompted, confirm that you want to shut down the device.
Step 6 If you have a console connection to the firewall, monitor the system prompts as the firewall shuts down. You
will see the following prompt:
System is stopped.
It is safe to power off now.
Do you want to reboot instead? [y/N]
If you do not have a console connection, wait approximately 3 minutes to ensure the system has shut down.
Step 7
You can now unplug the power to physically remove power from the chassis if necessary.
What's Next?
To continue configuring your threat defense, see the documents available for your software version at
the Cisco Firepower
For information related to using the management center, see the
Guide.
Cisco Firepower 1010 Getting Started Guide
88
) in the System section.
Documentation.
Threat Defense Deployment with a Remote Management Center
).
Firepower Management Center Configuration
Navigating