Cisco Firepower 1010 Getting Started Manual page 125

Threat Defense Deployment with CDO
Figure 37: License Search
Note
• Threat, Malware, and URL license combination:
• RA VPN—See the
Step 2
If you have not already done so, register CDO with the Smart Software Manager.
Registering requires you to generate a registration token in the Smart Software Manager. See the CDO
documentation for detailed instructions.
(Optional) Check the Software and Install a New Version
To check the software version and, if necessary, install a different version, perform these steps. We recommend
that you install your target version before you configure the firewall. Alternatively, you can perform an upgrade
after you are up and running, but upgrading, which preserves your configuration, may take longer than using
this procedure.
What Version Should I Run?
Cisco recommends running a Gold Star release indicated by a gold star next to the release number on the
software download page. You can also refer to the release strategy described in
us/products/collateral/security/firewalls/bulletin-c25-743178.html; for example, this bulletin describes short-term
release numbering (with the latest features), long-term release numbering (maintenance releases and patches
for a longer period of time), or extra long-term release numbering (maintenance releases and patches for the
longest period of time, for government certification).
Before you begin
For low-touch provisioning, if you log in and change the password, you disable the low-touch provisioning
process. You should only log in and complete a reimage if you already know you need to change the software
If a PID is not found, you can add the PID manually to your order.
• L-FPR1010T-TMC=
When you add one of the above PIDs to your order, you can then choose a term-based subscription
corresponding with one of the following PIDs:
• L-FPR1010T-TMC-1Y
• L-FPR1010T-TMC-3Y
• L-FPR1010T-TMC-5Y
Cisco AnyConnect Ordering
(Optional) Check the Software and Install a New Version
Guide.
https://www.cisco.com/c/en/
Cisco Firepower 1010 Getting Started Guide
123