Charging The Batteries; Changing The Batteries - Datalogic PowerScan PBT9500-RT Quick Reference Manual

Installing the Battery Pack

Charging the Batteries

Once the BC 90x0-BT is powered, you can charge the reader' s
batteries. Place the PowerScan
cradle. The Reader LED on the cradle/battery charger turns
red. The battery is completely charged when the Reader LED
on the cradle/battery charger turns green.

Changing the Batteries

Fixed Pack Models
1. Unscrew the bottom of the handle as shown to release
the battery.
2. Pull down to remove the battery.
1
Removable Pack models
1. Push the button at the bottom of the handle as shown
to release the battery.
2. Pull down to remove the battery.
1
WARNING
6
Do not incinerate, disassemble, short termi-
nals or expose to high temperature. Risk of
fire, explosion. Use specified charger only.
Risk of explosion if the battery is replaced by
an incorrect type. Dispose of the batteries as
required by the relevant laws in force.
™
BT9500 into the BC 90x0-BT
2
2
PowerScan™ Retail PBT9500-RT