Chapter 2 Preparations; Attaching And Replacing The Lithium Battery - Sony PDW-F355L Operating Instructions Manual

Preparations
Attaching and Replacing
the Lithium Battery
This camcorder uses a lithium battery to retain stored data.
When using the camcorder for the first time, be sure to
attach the supplied lithium battery (CR2032). The
camcorder will not operate correctly without this lithium
battery. After attaching the lithium battery, set the date and
time of the internal clock (see "Setting the Date and Time
of the Internal Clock" on page 33).
Note
Use CR2032 lithium batteries only. Other types of lithium
battery may come loose when the camcorder is subjected
to vibrations. If you have difficulty finding CR2032
lithium batteries, contact your Sony dealer.
1
1
Set the POWER switch to OFF.
2
Press down the catch at the top of the battery cover and
open the cover.
2
Catch
Press down
and pull
LITHIUM BATT
forward.
Battery cover
Chapter
3
Take out the lithium battery.
Press down and pull out
toward you.
4
Reverse step 3 to insert a replacement lithium battery.
Make sure that the + symbol on the battery is facing
you.
5
Close the battery cover.
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble or dispose of in fire.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's
instructions.
Bei der Entsorgung leerer Batterien sind die Anweisungen
des Herstellers zu befolgen.
Service life of the lithium battery
When the lithium battery's voltage falls, the lithium
battery low voltage warning appears on the LCD monitor
(see page 16). If this warning appears, replace the lithium
battery (CR2032) within three or four days.
The lithium battery has an average service life of about one
year.

Attaching and Replacing the Lithium Battery

2
29