Locking (Write-Protecting) Clips - Sony PDW-F355L Operating Instructions Manual

a)
Name of loaded clip list
Sub clip information (date and
time of creation, initial timecode,
playback time)
Currently selected
sub clip
Recording date and time
of selected sub clip
a) If the clip list has a title (page 71), the title is displayed enclosed in
double quotation marks, for example "TITLE00001".
To escape from the clip list display to the whole-
screen display
Press the THUMBNAIL button to turn the
THUMBNAIL indicator off.
This returns to the clip list playback state.
Note
Stop the unit before using the SUB CLIP button. Press
the STOP button if the message "STOP ONCE!"
appears.
3
Use the SEL/SET button or MENU knob to select the
sub clip you want to cue up.
4
To cue up the selected clip, press the SEL/SET button
or MENU knob.
To start playback from the selected clip, press the
PLAY/PAUSE button.
Note
The clip list thumbnail screen always shows the first
frame (In point) of each sub clip.

Locking (Write-Protecting) Clips

In the thumbnail screen, you can lock them so that they
cannot be deleted or altered.
Locking prevents the following operations on clips.
• Deletion
• Renaming by FAM or FTP
• Changing the thumbnail image (index picture)
Sixth frame is selected
from a total of 34 sub clips.
Total playback time of
sub clips in a clip list
• Adding and deleting shot marks
Notes
• Locked clips are deleted along with other clips.
• Clips cannot be locked or unlocked when the Write
Inhibit tab of the disc is set to the recording disabled
position.
1
With the SUB CLIP indicator off, press the
THUMBNAIL button, lighting the THUMBNAIL
indicator.
The thumbnails of the clips on the disc appear.
2
Select the clip to lock (you can do this with the same
operations as step 2 of "Searching Using Thumbnails"
(page 78).
Clip to be locked
3
Hold down the SHIFT button and press the CLIP
MENU button.
Then CLIP menu appears.
4
Use the SEL/SET button or MENU knob to select
"LOCK/UNLOCK CLIP", and then press the button
or knob.
A lock confirmation screen appears. This screen
displays clip names and clip titles.
To cancel the lock operation and return to the
thumbnail screen
Use the SEL/SET button or MENU knob to select
"CANCEL", and then press the button or knob.
83
Thumbnail Search