Table of Contents
Advertisement
clips on that disc. (The only possible operations are
playback and disc formatting.)
- Writing of clips with user-defined names
- Deletion of clips (except the last recorded clip)
- Locking of clips
• If you attempt to write a C*.MXF file which does not
meet the conditions specified in remark c) to this table
Edit directory
File name
Content
a)
Clip list file
E*E01.SMI
*: 0001 to 0099
Metadata file generated
a)
E*M01.XML
automatically when E*E01.SMI
file is created.
*: 0001 to 0099
Other files
Files other than the above
a) The "E*" part can be changed to a user-defined name.
b) Only files which can be written by XDCAM. Partial writing is not
possible.
c) Only files which can be written by XDCAM
d) Only when the Write Inhibit tab on the disc is set to enable recording.
e) When the "E*" part of a *E01.SMI is changed, an E*M01.XML file with
the same name in the "E*" part is also changed automatically.
f) When an E*E01.SMI file is created, an E*M01.XML file with the same
name in the "E*" part is also generated automatically.
Sub directory
File name
Content
a)
Proxy AV data (MXF) file
C*S01.MXF
generated automatically when
a C*.MXF file is created.
*: 0001 to 4999
Other files
Files other than the above
a) The "C*" part can be changed to a user definded name.
b) When the "C*" part of a C*.MXF file name is changed, a C*S01. MXF
file with the same name in the "C*" part is generated automatically.
c) When a C*.MXF file is created, a C*S01.XML file with the same name in
the "C*" part is generated automatically.
d) When a C*.MXF file is deleted, the C*S01.XML file with the same name
in the "C*" part is also deleted automatically.
General directory
File name
Content
Any file
–
a) UTF-8 file names can be up to 63 bytes in length. (Depending on the
character type, file names (including extension) may be limited to 21
characters.)
b) Only when the Write Inhibit tab on the disc is set to enable recording.
158
Overview
via a FAM connection, a Windows error message
appears to the effect that the file or directory is corrupt
and cannot be read.
1) PDW-F350/F330, PDW-530/510, PDW-F70/F30, PDW-1500, PDW-R1,
PDW-V1, PDW-D1, and PDW-70MD.
Operations
Read/Partial read Write/Partial write Rename
Yes
b)
Yes
Yes
b)
Yes
–
No
g) When an E*E01.SMI file is deleted, an E*M01.XML file with the same
name in the "E*" part is also deleted automatically.
Note
Directories cannot be created in the Edit directory.
Operations
Read/Partial read Write/Partial write Rename
Yes
No
–
No
Note
Directories cannot be created in the Sub directory.
Operations
Read/Partial read Write/Partial write Rename
Yes
Yes
The following directory operations are possible in the
General directory.
• Directory creation (up to 64 levels, including the
General directory)
Create
Delete
Yes
c)
d)
Yes
Yes
e)
f)
g)
No
No
No
–
No
–
Create
Delete
b)
c)
d)
No
No
No
–
No
–
Create
Delete
a)
Yes
b)
Yes
Yes
Advertisement
Table of Contents
