Table of Contents
Advertisement
• 10 m or less (including the macro area): 0.1 m
• 10 m to 100 m: 1 m
• 100 m to 200 m: 10 m
• 200 m to infinite distance: 50 m
g Power source voltage/battery remaining capacity
When the unit is powered from a battery pack or AC
adaptor attached to the battery attachment shoe, indicates
the remaining capacity of the power source voltage. When
the unit is powered from an external battery (a battery
connected to the DC IN connector), indicates the power
source voltage.
When the DISP BATT REMAIN item is set to "INT" on
the VF DISP 1 page of the OPERATION menu, the battery
voltage is not indicated.
However, when the Anton Bauer intelligent battery system
or the BP-GL95/GL65 Battery Pack is used, the remaining
battery capacity is automatically detected and indicated in
steps of 10%.
• Until the remaining battery capacity is reduced to 40%,
the indications MAX, 90%, 80%...40% are displayed for
three seconds in the viewfinder each time the remaining
battery capacity reduces by 10%.
• When the remaining battery capacity is less than 40%,
the indication is displayed all the time.
• When the remaining battery capacity is less than 10%,
the indication flashes. When the remaining battery
capacity is reduced further, the "LOW" flashes.
h Clip list name
Displays the name (E0001 to E0099) of the currently
selected clip list.
i 5600 indicator
Appears when the electric color temperature filter function
is on.
j Filter
Indicates the currently selected filter type.
k White balance memory
Indicates the currently selected white balance automatic
adjustment memory.
A: Displayed when the WHITE BAL switch is set to A.
B: Displayed when the WHITE BAL switch is set to B.
P: Displayed when the WHITE BAL switch is set to PRST
or when the preset button on an RM-B150 has been
pushed.
T: Displayed when ATW is being used.
l Gain value
Indicates the gain value (in dB) of the video amplifier, as
set by the GAIN switch.
m Shutter speed
Indicates the shutter speed or the shutter mode. However,
if the SHUTTER switch (see page 13) is set to OFF,
nothing is displayed.
For details of the displayed shutter speed, see "Setting the
Electronic Shutter" on page 57.
n Operation/alarm message display area
For details, see "Operation/alarm messages" on
page 168.
o Audio level
Indicates the level of audio channel 1 and channel 2. The
peak indication of the VDR level meter is related as
follows to the audio level.
For example, the level of the internal 1 kHz sine wave
signal is -20 dB, causing the six bars from the left to light.
Audio channel 1 level indicator
Audio channel 2 level indicator
VDR level meter indicator
p Remaining disc capacity
Indicates the remaining recording time (in minutes) of the
disc.
Examples of remaining recording time indication
Indication
Remaining recording time
90 <
More than 90 minutes
90 - 85
90 to 85 minutes
85 - 80
85 to 80 minutes
.
.
.
20 - 15
20 to 15 minutes
15 - 10
15 to 10 minutes
10 - 5
10 to 5 minutes
5 - 0
5 to 0 minutes
No display
0 minute
As shown below, dual-layer discs (PFD50DLA) allow
longer recording times than those in the above table.
Indication
250 <
240 <
230 <
q Remaining clips display
Displays the remaining number of clips that can be
recorded. The display flashes once per second when the
number of remaining clips is less than 10.
.
.
.
Remaining recording time
More than 250 minutes
More than 240 minutes
More than 230 minutes
Location and Function of Parts
27
Advertisement
Table of Contents
