Sony XC-003 Operating Instructions Manual page 31

!™ DC IN (input) / VBS (VBS signal output) connector (12-pin)
Supplies power from the camera adaptor and outputs VBS signals. Outputs Y signals for
external synchronization.
Pin no.
HD/VD
1 Ground
2 +12 V
3 Video output (ground)
4 Video output (signal)
5 HD input (ground)
6 HD input (signal)
7 VD input (signal)
8 —
9 —
10 Ground
11 +12 V
12 VD input (ground)
a) You need to change the internal switch settings for HD and VD outputs.
See "Switch Settings" (pages 48 and 49) for details.
b)The clock output is not set when shipped from the factory. Soldering is required in order for clock
output.
For details, contact your Sony sales representative.
External sync mode
VS
Ground
+12 V
Video output (ground)
Video output (signal)
—
—
VS input (signal)
—
—
Ground
+12 V
VS input (ground)
Camera sync
signal output
Ground
+12 V
Video output (ground)
Video output (signal)
HD output (ground)
a)
HD output (signal)
a)
VD output (signal)
b)
Clock output (ground)
b)
Clock output (signal)
Ground
+12 V
VD output (ground)
1 9
2 8
10
3 11 12 7
4 6
5
35