Chapter 2: Removing And Installing Components; Recommended Tools; Screw List - Dell XPS 13 9315 Service Manual

Removing and installing components
NOTE: The images in this document may differ from your computer depending on the configuration you ordered.

Recommended tools

The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Torx #5 (T5) screwdriver

Screw list

NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 1. Screw list
Component Secured to
Base cover Palm-rest and keyboard
assembly
Battery Palm-rest and keyboard
assembly
Fan System board
Heat sink System board
Display-assembly System board
cable brackets
Camera and display- System board
assembly cable
Display-assembly Palm-rest and keyboard
hinges assembly
Display-assembly Palm-rest and keyboard
hinges assembly
Screw type Quantity
M2x3, Torx 5 8
M2x3 8
M1.6x2.5 2
M2x3 4
M1.6x2.3 4
M1.6x3.5 2
M2.5x4.3 6
M1.6x3 2
Screw image
Removing and installing components
2
9