Steps
1. Align the screw holes of the battery with the screw holes on the palm-rest and keyboard assembly.
2. Place the battery on the palm-rest and keyboard assembly.
3. Replace the eight screws (M1.6x2.5) that secure the battery to the palm-rest and keyboard assembly.
4. Connect the battery cable to the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Fan
Removing the fan
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image(s) indicate the location of the fan and provides a visual representation of the removal procedure.
18
Removing and installing components
After working inside your
Before working inside your
computer.
computer.