Paint Menu - Sony DXC-D50K, DXC-D50PK, DXC-D50L, DXC-D50L, DXC-D50WSL, DXC-D50WSPL, DXC-D50H, DXC-D50PH, DXC-D50WSH Operating Instructions Manual

PAINT Menu

The PAINT menu consists of 10 pages. To display the
PAINT menu, first display the TOP MENU, turn the
MENU dial to select PAINT, then press the MENU
dial.
For details on how to display the TOP MENU, see
"Displaying the TOP MENU" on page 55.
Structure and setting values of the PAINT menu
Submenu title Page
<SHUTTER> P1
<BLACK/FLARE> P2
<DETAIL> P3
<GAMMA/BLACK P4
GAMMA>
a) NTSC: 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000, CLS
PAL: 1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000, CLS
b) When the camera is used alone
NTSC: 60.38 Hz to 6000 Hz
PAL: 50.00 Hz to 6000 Hz
When the camera is used with the RCP-TX7
NTSC: 60.38 Hz to 200.3 Hz (The display on the panel
of the RCP-TX7 is 60.4.)
PAL: 50.31 Hz to 201.4 Hz
Setting item: Selectable
Initial value values
a)
SHUTTER: 1/100
CLS FREQUENCY: 60.38 Hz
50.31 (PAL)
60.38 (NTSC)
EVS: OFF ON, OFF
PAINT MENU RESET
MASTER BLACK: 0 –99 to 0 to 99
FLARE LEVEL: –99 to 0 to 99
[R] 0 [G] 0 [B] 0
ON ON, OFF
LEVEL: 0 –99 to 0 to 99
H/V RATIO: 0 –99 to 0 to 99
LEVEL DEPEND: 0 –99 to 0 to 99
FREQUENCY: 0 –99 to 0 to 99
CRISP: 0 –99 to 0 to 99
GAMMA LEVEL: –99 to 0 to 99
[R] 0 [B] 0 [M] 0
BLACK GAMMA LEVEL: –99 to 0 to 99
[R] 0 [B] 0 [M] 0
<SHUTTER>
SHUTTER
CLS FREQUENCY: 60.38H
EVS
PAINT MENU RESET
Remarks
— To adjust the shutter speed
b) To adjust the CLS frequency
To set EVS (The vertical resolution is chaged
from 400 lines to 450 lines.)
Note
When EVS is turned ON, the vertical resolution
can be increased, but aliasing may be
generated when shooting a moving subject.
— To reset the PAINT menu settings
To adjust the master black level
To adjust the flare level
To turn the flare on/off
To adjust the detail (contour correction) level
To adjust the ratio of vertical detail to horizontal
detail in detail correction (contour correction)
To decrease the black level in the detail
correction (contour correction)
To adjust thickness of contour lines for the detail
correction (contour correction)
To adjust the level at which noise signals are to
be removed in the detail correction (contour
correction)
To adjust the gamma curve
To adjust the gamma curve near the black
When the camera is used with the RCP-D50/D51
NTSC: 60.38 Hz to 6000 Hz
PAL: 50.31 Hz to 6000 Hz
Chapter 4 Viewfinder Screen Indications and Menus
P1 TOP
: 1/100
Z
: OFF
65