Sony DXC-D50K, DXC-D50PK, DXC-D50L, DXC-D50L, DXC-D50WSL, DXC-D50WSPL, DXC-D50H, DXC-D50PH, DXC-D50WSH Operating Instructions Manual page 64

Menu Operation
Submenu title Page Setting item:
<ZEBRA> 9
<MONITOR OUT> 10
<TLCS> 11
64
Chapter 4 Viewfinder Screen Indications and Menus
Selectable
Initial value values
ZEBRA MODE: 1&2 1, 2, 1&2
ZEBRA1 LEVEL: 75% 50 to 75 to 109
WIDTH: 10% 0 to 10 to 30
ZEBRA2 LEVEL: 100% 50 to 100 to 109
MONITOR OUT: ENC ENC, Y
CHARACTER: ON ON, OFF
RM CHARACTER: ON, OFF
OFF
AGC: ON ON, OFF
AGC LIMIT: 12 3, 6, 9, 12, 15, 18 To adjust the limit value for AGC when TLCS
AGC CHANGE F-5.6, F-4,F-2.8,
POINT: F2.8 F-2, OPEN
AE: ON ON, OFF
AE LIMIT: 1/250 1/100, 1/150,
1/200, 1/250
AE CHANGE F-16, F-11, F-8,
POINT: F16 F-5.6
Remarks
To select if one zebra pattern or two zebra
patterns are to be displayed
To adjust the display level of Zebra 1
To adjust the range of video level of Zebra 1
To adjust the display level of Zebra 2
To select the output signal from the
MONITOR OUT connector
To select if character data are to be superimposed
on the MONITOR OUT signal or not
To select if character data are to be superimposed
on the REMOTE signal or not
To set if AGC is to be activated or not when TLCS
is activated
is activated
To adjust the aperture value at which AGC (auto
gain control) is to be activated when TLCS is
activated
To set if AE (electronic shutter) is to be activated or
not when TLCS is activated
To set the limit value for AE (electronic shutter)
operation when TLCS is activated
To set the aperture limit value at which AE
(electronic shutter) operation is to be activated
when TLCS is activated