Sony DXC-D50K, DXC-D50PK, DXC-D50L, DXC-D50L, DXC-D50WSL, DXC-D50WSPL, DXC-D50H, DXC-D50PH, DXC-D50WSH Operating Instructions Manual page 63

Submenu title Page Setting item:
<VF/MARKER> 5
<BOX CURSOR> 6
<VF DISPLAY1> 7
<VF DISPLAY2> 8
a) - -: Not available for the DXC-D50/D50P
Selectable
Initial value values
SAFETY ZONE: ON ON, OFF
90% 80%, 90%
a)
NORMAL NORMAL,
ASPECT
ASPECT IND: OFF a) LINE, MASK,
LINE&MASK,
OFF
(- -) a) 15:9, 14:9, 13:9,
4:3
CENTER MARKER: ON, OFF
ON
VF SCAN: AUTO a) AUTO, 16:9, 4:3
CURSOR: OFF ON, OFF
H POSITION: 50 0 to 50 to 99
V POSITION: 50 0 to 50 to 99
H WIDTH: 50 0 to 50 to 99
V WIDTH: 50 0 to 50 to 99
IRIS: ON ON, OFF
GAIN: ON ON, OFF
WHITE: ON ON, OFF
ND FILTER: ON ON, OFF
5600K: ON ON, OFF
SHUTTER: ON ON, OFF
SKIN DTL: ON ON, OFF
AUDIO: ON ON, OFF
TAPE REMAIN: ON ON, OFF
VTR STATUS: ON ON, OFF
VTR ALARM: ON ON, OFF
TIME CODE: ON ON, OFF
RETURN: ON ON, OFF
VF TALLY: ×1
×1, ×2
Remarks
To turn the safety-zone display on/off
To select the size of the safety zone
To select if the safety zone is to change in
accordance with the aspect ratio
To select the aspect indication: by line (LINE)
or masking off a portion (MASK)
To select the aspect ratio for aspect indication
(available only when ASPECT IND is set to LINE)
To turn the center marker on/off
To select if the aspect ratio of the camera is
to apply to the viewfinder
To turn the box cursor display on/off
To adjust the horizontal position of the box cursor
To adjust the vertical position of the box cursor
To adjust the horizontal width of the box cursor
To adjust the vertical width of the box cursor
To turn on/off the display of IRIS setting value
on the viewfinder
To turn on/off the display of GAIN setting value
on the viewfinder
To turn on/off the display of WHITE setting value
on the viewfinder
To turn on/off the display of FILTER setting value
on the viewfinder
To turn on/off the 5600K indication on the
viewfinder
To turn on/off the display of SHUTTER setting
value on the viewfinder
To turn on/off the display of SKIN DTL setting
value on the viewfinder
To turn on/off the display of AUDIO setting
value on the viewfinder
To turn on/off the tape remaining time display
on the viewfinder
To turn on/off the VTR status display on the
viewfinder
To set if VTR warning indications are displayed on
the viewfinder or not
To set if time code is displayed on the viewfinder or
not
To set if the return video indication is displayed on
the viewfinder or not.
To select if both the upper and lower tally
lamps (×2) in the viewfinder are to function or only
the upper lamp (×1) functions
Chapter 4 Viewfinder Screen Indications and Menus
63