Sony DXC-D50K, DXC-D50PK, DXC-D50L, DXC-D50L, DXC-D50WSL, DXC-D50WSPL, DXC-D50H, DXC-D50PH, DXC-D50WSH Operating Instructions Manual page 60

Menu Operation
5
Turn the MENU dial to select the line for which
the menu item is to be registered, then press the
MENU dial.
The operation select screen appears.
If you select a line for which no item has been
registered, the ITEM SELECT screen shown in
Step 6 is displayed.
6
Turn the MENU dial to select SELECT, then press
the MENU dial.
The ITEM SELECT screen appears.
<ITEM SELECT>
1 :GAIN[L]
2 :GAIN[M]
3 :GAIN[H]
4 :OUTPUT[DCC]
5 :5600K DIMMER
6 :OPERATION RESET
7 :A.IRIS OVERRIDE
8 :WHT C. TEMP
9 :WHT C. TEMP FINE
10:WHT C. TEMP R GAIN
7
Select an item to be registered, following the
procedure below.
To select from among items 1 - 10
Turn the MENU dial to select an item to be
registered, then press the MENU dial. The screen
returns to the USER P1 EDIT screen, and the
selected item is displayed.
<USER P1 EDIT>
GAIN[L]
DTL LEVEL
MASTER BLACK
PRESET MATRIX
SCREEN MODE
To select items 11 or after
1) Turn the MENU dial to move the arrow to the
figure at the top of the screen, then press the
MENU dial.
The arrow changes to a question mark.
2) Turn the MENU dial until the desired item
appears, then press the MENU dial.
The question mark changes to an arrow.
60
Chapter 4 Viewfinder Screen Indications and Menus
8
You must register the USER PAGE you have set to
1 RET
one of USER PAGE 1 through USER PAGE 10. Then
you can retrieve and use the registered USER PAGE
from the USER menu.
For details on how to register a USER PAGE, see
"Registering a desired menu page on the USER menu,"
page 56.
To change the order of the items
You can change the order for the items with the same
method as that for the menu pages.
To delete an item
You can delete an item with the same method as that
for the menu pages.
Resetting the settings on all USER PAGEs
U2 TOP
to the factory-preset values
1
2
3
4
3) Turn the MENU dial to select the item to be
registered, then press the MENU dial.
The screen returns to the USER P1 EDIT
screen, and the selected item is displayed.
Repeat Steps 5, 6 and 7 as required.
When registration of all your desired items on the
page is completed, turn the MENU dial to move
the arrow to TOP at the top of the screen, then
press the MENU dial.
The screen returns to the TOP MENU screen.
Display the TOP MENU.
For details, see "Displaying the TOP MENU," page 55.
Turn the MENU dial to select USER MENU
CUSTOMIZE, then press the MENU dial.
Display page U12.
For details, see "Displaying your desired menu page"
on page 55.
Turn the MENU dial to select CUSTOMIZE
MENU RESET, then press the MENU dial.
The prompt "RESET OK?" is displayed.