Sony handycam DCR-IP1E Operation Manual page 36

6
Touch the desired effect.
The still image is superimposed on the
movie which is currently in the standby
mode.
0:00:00
60min STBY
MEMORY MIX:
MCCAM CHROMA
–
1 0 1
101-0001
7
Touch (decrease) /
(increase) to adjust the following.
[MTCAM LUMI.]
The color scheme of the bright area in the
still image which is to be swapped into a
movie. When you want to record only the
still image stored on the "Memory Stick
Duo" to a tape, touch
[MTCAM LUMI.] adjustment screen
until the bar indicator is extended fully to
the right side.
[CAMTM CHROMA]
The color scheme of the blue area in the
movie.
[MTCAM CHROMA]
The color scheme of the blue area in the still
image which is to be swapped into a movie.
8
Touch twice.
appears.
9
Start recording.
When you are recording on a tape
Press START/STOP.
When you are recording on a
"Memory Stick Duo"
Press PHOTO fully.
To cancel the MEMORY MIX
Follow steps 3 and 4, then touch [OFF] in step 5.
b Notes
• When the overlapping still image has a large amount
of white, the image in the thumbnail screen may not
be clear.
36
Recording
+
OK
on the
• When you use MEMORY MIX in the mirror mode
(p. 24), the picture on the LCD screen appears
normally, without being mirror-reversed.
• You may not be able to play back pictures modified
on your computer or recorded with other camcorders
on your camcorder.
z Tip
• The supplied SPVD-010 USB Driver CD-ROM
contains sample images for use in MEMORY MIX
operations. Refer to the supplied "Computer
Applications Guide" for details.