Recording Still Images On A "Memory Stick Duo - Sony handycam DCR-IP1E Operation Manual

Recording still images on a "Memory
Stick Duo"
1
Attach the charged battery pack to the camcorder.
a
Slide the BATT
lever in the direction of the arrow as
shown in the illustration and remove
the battery terminal cover.
BATT (battery release) lever
2
Insert a "Memory Stick Duo" into the camcorder.
Insert it so that the b mark
in the bottom left corner is
facing down. Push it in
until it clicks.
10
Quick Start Guide
b
(battery release)
To charge the battery, see page 13.
Attach the battery pack with its
terminal side facing your camcorder
as shown in the illustration and press
down the battery pack until it clicks.
b
mark