Recording A Still Image On A "Memory Stick Duo" While Recording Movies On A Tape; Adjusting The Exposure; Adjusting The Exposure For Backlit Subjects; Fixing The Exposure For The Selected Subject - Flexible Spot Meter - Sony handycam DCR-IP1E Operation Manual
Sony video camera recorder dcr-ip1e operations guide
Hide thumbs
Also See for handycam DCR-IP1E:
- Service manual (82 pages) ,
- Applications (48 pages) ,
- Brochure & specs (28 pages)
Table of Contents
Advertisement
Available languages
Available languages
To cancel the self-timer
Follow steps 1 and 2, then select [OFF] in step
3.
Recording a still image on a
“Memory Stick Duo” while
recording movies on a tape
The image size is set to [640 × 480]. If you
want to record a still image in a different size,
use the Memory photo recording function
(p. 25).
PHOTO
Press PHOTO fully during recording.
Recording is complete
60min
REC
0:00:10
when the scrolling
stops.
P-MENU
To record still images in standby mode
Press and hold PHOTO lightly. Check the
image, then press PHOTO fully.
b Notes
• You cannot record a still image on a “Memory Stick
Duo” during the following operations:
– FADER
– [16:9 WIDE] mode
– Memory overlap
– MEMORY MIX
• Titles are not recorded on a “Memory Stick Duo.”
Adjusting the
exposure
The exposure is adjusted automatically in the
default setting.
Adjusting the exposure for backlit
subjects
When your subject has its back to the sun or
other light, you can adjust the exposure to
prevent the subject from becoming
shadowed.
BACK LIGHT
Press BACK LIGHT during recording or
in the standby mode.
appears.
.
To cancel the back light function, press BACK
LIGHT again.
b Note
• The back light function is canceled when you set
[SPOT METER] (p. 28) or [EXPOSURE] to
[MANUAL] (p. 29).
Fixing the exposure for the
selected subject
— Flexible spot meter
You can adjust and fix the exposure to the
subject, so that it is recorded in suitable
brightness even when there is strong contrast
Page 28
Hide quick links:
Advertisement
Chapters
Table of Contents
