Using The Accessories - AEG BSE576321M User Manual

14 www.aeg.com

8. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
8.1 Using the core
temperature sensor
The core temperature sensor measures
the core temperature of the meat.
There are two temperatures to be set:
• The oven temperature. Refer to the
table for roasting.
• The core temperature. Refer to the
table for the core temperature sensor.
CAUTION!
Only use the core
temperature sensor supplied
with the appliance, or
genuine replacement parts.
1. Put the plug of the core temperature
sensor into the socket on the top of
the cavity.
The indicator for the core temperature
sensor
2. Put the point of the core temperature
sensor into the centre of the meat.
3. Press the button
core temperature. You can set the
temperature from 30 °C to 99 °C.
4. Set the oven function and the oven
temperature.
When the meat is at the set core
temperature, an acoustic signal sounds
for two minutes. Press a button to stop
the signal.
5. Deactivate the appliance.
6. Remove the plug of the core
temperature sensor from the socket.
flashes.
or to set the
Remove the meat from the
appliance.
If the meat is not cooked to your
satisfaction, do the above steps again
and set a higher core temperature.
You can change the temperature at any
time during the cooking. Press
change the set core temperature.
WARNING!
Be careful when you remove
the tip and plug of the core
temperature sensor. The
core temperature sensor is
hot. There is a risk of burns.
8.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Baking tray/ Deep pan:
Push the baking tray / deep pan between
the guide bars of the shelf support.
Wire shelf and baking tray / deep pan
together:
to