Using the Setup Menu
IDetailed Settings
Use this sub-menu to specify whether or not a startup screen should be projected whenever
the projector is turned on.
Input Source Specific Menu Items
Input Source
RGB
Component
S-VIDEO
VIDEO
No Signal
Setting Explanations
On: Projects a startup screen.
Off: No startup screen is projected.
Setting Storage
A single setting is stored, which is applied to all input sources.
IDetailed Settings
This sub-menu lets you specify what should be projected when there is no input signal to the
projector.
Input Source Specific Menu Items
Input Source
RGB
Component
S-VIDEO
VIDEO
No Signal
Setting Explanations
Blue: Displays a blue screen when there is no input signal.
Black: Displays a black screen when there is no input signal.
Setting Storage
A single setting is stored, which is applied to all input sources.
Advanced Settings 1
Available Items (Parentheses indicate defaults.)
On, (Off)
Advanced Settings 1
Available Items (Parentheses indicate defaults.)
(Blue), Black
Startup Screen
No Signal Screen
42