Output Module; On/Off Switch; Tilt Control - Arturia DIST TUBE-CULTURE User Manual

6.2. Output Module

The output module in the Advanced view of Dist TUBE-CULTURE likewise has 24dB-per
octave highpass and lowpass filters for the post-processing signal.
Why do we have identical filters on both the input and output sections? To give you
maximum flexibility. For example, you may want to allow a full-range signal to come in, but
limit the high and/or low boundaries of the distorted signal. Or, vice-versa, you may want to
limit the signal that even gets processed in the first place, but then hear the effect applied to
that range.

6.2.1. On/Off Switch

This section features an on/off switch that bypasses the filters altogether.

6.2.2. Tilt Control

The center knob in the output module "tilts" the output EQ in one direction or another.
That is, it creates an upward or downward slope across the spectrum. This slope pivots at
630Hz, has a range of -12 to +12 dB, and is visualized in the
described below.
32
Advanced Meter [p.33], which is
Arturia - User Manual Dist TUBE-CULTURE - Advanced Panel