Casio LPCW-50 Application User Manual page 82

Symptom Possible Cause
G Printing is not
Any of the following
clear. can interfere with
G Printing is
proper printing.
A disc label that is
poor quality.
G Printing is too
not smooth.
light. A disc label that
has a design or
lines printed on it.
A disc label that
support ink jet
printing only.
Dirty print head
Improper print density
G Printing is
Improper alignment of
misaligned. the disc in the tray
G Cannot print.
The ink ribbon is used
up.
The driver is not
installed correctly.
Recommended Action
See the separate
"Quick Start Guide"
sheet for information
about recommended
media.
Clean the print head.
(page 79).
Adjust the print
density. (page 76).
Use the alignment
guide when aligning
the disc in the tray
(page 72).
Replace the ink ribbon
cassette with a new
one (page 23).
Disconnect the USB
cable and re-install
the software.
Installing the software
also installs the
driver. After re-
installing, connect the
USB cable again.
Symptom Possible Cause
G The last part
Too many characters
of input data per line
does not
print.
Too many lines
G Cannot import
The music CD you are
CD-Text. trying to import from
does not have any
CD-Text on it.
Your CD drive does not
support reading of CD-
Text.
G Cannot create
The specified drive or
a data index media where you are
file. trying to save the
data is write
protected or full.
Recommended Action
Use a smaller font
size or reduce the
number of characters
per line.
Use a smaller font
size or reduce the
number of lines.
Type text manually
into the label input
boxes, or find a
Website on the
Internet that contains
the data you want to
include on the label,
copy it, and then
paste it into the label
input boxes.
Remove the write
protection or delete
data you no longer
need to make room
from the data index
file. Other options
include switching to a
different drive or
different media.
81