Dvd Picture Signal Selection/Zooming - Toshiba SD-22VB User Manual

DVD Picture Signal Selection/Zooming

You can select the output signal of
DVD playback picture to the TV
screen as an VIDEO signal or a RGB
signal.
VCR DVD
TV/VCR AUX
AUDIO SELECT
MEMORY ZOOM
TIMER REC
REC/OTR
PLAY
REW
SLOW
STOP
INDEX Ð SKIP INDEX +
SET UP
CH +
VCR MENU
SET Ð
ENTER
CH Ð
CANCEL
Notes:
• Picture Signal Selection is only
available for connecting with a 21 pin
Scart Cable.
• Depending on your TV, NTSC disc
may not playback correctly in colour. In
this case, it is recommended to select
the Picture Signal RGB on step 2.
• Only use RGB setting if your TV is
RGB compatible.
40
OPEN/CLOSE
CLOCK
COUNTER
ANGLE
COUNTER RESET
AUDIO SUBTITLE
ATR
PLAY MODE
E.A.M SP/LP
DISPLAY
RETURN CALL
FWD
PAUSE/STILL
TITLE A-B RPT
MENU
ZERO RETURN
SET + INSTANT SKIP
VIDEO Plus+
Preparation:
• Turn ON the TV and set to the video input mode.
• Press DVD to select the DVD mode. (The DVD indicator will
light)
1
Press SET UP in the stop
mode.
Press or to select "Pic-
ture", then press
select "Video Out Select".
2
Press ENTER.
Press or to select the
desired picture signal, "Video"
or "RGB".
3
To make SETUP screen disappear, press SET UP.
Notes:
• If you use the connection with S-Video cord, be sure to set the
"Video Out Select" at step 2 above to "Video". If you select "RGB",
the TV screen will be disturbed.
• If you selected "RGB" at step 2 above, press TV/VCR to select
VCR. (VCR indicator will appear on the display) Otherwise, the
TV screen will be disturbed when you select the channel with
TV's CHANNEL UP/DOWN buttons.
Zooming
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
1
Press ZOOM during playback.
The centre part of the image
will be zoomed in.
As you repeatedly press the
ENTER or ZOOM while
"ZOOM" is selected, the mag-
nification level changes. Vari-
ation of the levels includes
image reduction.
2
Press / or
You may move the frame from the centre position to UP,
DOWN, LEFT or RIGHT direction.
• If you select "EXIT" and press the ENTER, you can turn off
the symbol mark, keeping the current magnification level.
• Press CANCEL to restore the zoom point to the centre
of the picture.
3
While "ZOOM" is selected, press ZOOM repeatedly to re-
turn to a 1:1 view.
Picture
TV Shape 4:3LB
Video Out Select Video
or to
: Select
Picture
TV Shape 4:3LB
Video Out Select Video
: Select
ZOOM
EXIT
Zoom Off
: Select
/ to view a different part of the frame.
: Enter
Video
RGB
: Enter
: Change