Table of Contents
Advertisement
HOW TO INITIALIZE THE HDD & DVD/VCR
To put the program back at the factory-default,
initialize the HDD & DVD/VCR as the following
procedure.
< HDD/DVD Section >
1. Turn on the HDD & DVD/VCR.
2. To put the HDD & DVD/VCR into the HDD mode,
press [HDD] on the remote control unit.
3. To put the HDD & DVD/VCR into the Version
display mode, press [VARIABLE SKIP], [1], [2],
and [3] buttons on the remote control unit in that
order within three seconds.
Fig. a appears on the screen.
*1: " ******* " differs depending on the models.
*2: Firmware Version differs depending on the
models, and this indication is one example.
F/W VERSION DISP
MODEL NAME :
DVB-T VERSION :
FE VERSION :
BE VERSION :
TT VERSION :
DV UNIQUE ID :
LD ADJUSTMENT :
DISC ADJUSTMENT :
DEFAULT SETTING : ENTER
EXIT : RETURN
Fig. a Version Display Mode Screen
4. Press [ENTER/OK] button, then the HDD & DVD/
VCR starts initializing. When the initializing is
completed, the HDD & DVD/VCR exits the Version
display mode and turns off the power
automatically.
*
To move into the Normal mode from the
Version display mode, press [RETURN] button
on the remote control unit instead of [ENTER/
OK] button.
*
When [
] button is pressed before [ENTER/
OK] button is pressed, the HDD & DVD/VCR
exits the Version display mode, then the power
turns off.
Note: By initializing, "Current Clock", "Setup
Changing Item", "Channel Setup" and "Timer
Program" are initialized.
*******
***.***
***_***_***
*************
********
******** ********
OK
OK
1-10-1
E3TK0INT
Advertisement
Table of Contents
