Toshiba SD-22VB User Manual page 28

VIDEO Plus+ Recording
Notes:
• As long as the timer is activated (clock
symbol indicated on the display), you
cannot use the VCR. If you want to use
the VCR, first press TIMER REC to
deactivate the timer.
• Not all TV Stations transmit PDC signal
all of the time, therefore it is advisable to
check before setting PDC to ON, if you
do set PDC to ON and no signal is
received your recording might not take
place at all. To check PDC status,
change to the channel on your DVD/VCR
you wish to record from, if the word
"PDC" appears on the screen for a few
seconds then that channel is
broadcasting PDC and you can set the
feature to ON.
28
If you have selected Daily or Weekly in step 3, then you
can select a recording date again. The date must blink.
If it does not blink, then press
the DATE blinks. Then press
the desired date appears. The following date options are
available:
SUN-SAT: all dates from Sunday to Saturday, or
MON-SAT: only from Monday to Saturday, or
MON-FRI: only from Monday to Friday.
WKL-MON: each Monday, WKL-TUE: each Tuesday
WKL-SUN: each Sunday, etc.
Recording period extension
The recording end-time will be set by VIDEO Plus+
automatically. However you can extend the recording
end-time manually. The time END must blink.
If it does not blink, then press
the time end blinks. Then press
5
Press ENTER after the
confirmation. Then press
VCR MENU repeatedly until
the TV picture appears. To
enter another programme,
repeat
steps 1 - 5.
6
Although the data is stored in the timer memory, the timer
function is not yet ready for recording. To accomplish this,
activate it by pressing TIMER REC.
If no cassette tape is loaded,
the clock symbol is blinking.
To record with the PDC (Programme
Delivery Control) system
The PDC system starts
recording when it picks up
a special signal transmitted
by the broadcaster with the
TV programme – even if
the TV programme starts
early, late or runs on longer
than scheduled. In step 4, press
OFF flashes, then press
recording with PDC.
or repeatedly until
or repeatedly until
or repeatedly until
to extend.
15 FRI 17:30 18:00 3
: :
:
:
: :
: :
: :
: :
: :
SELECT : / ENTER
EXIT : MENU
VCR
TIMER REC SET
DATE 15 FRI
START 17:30
END 18:00
CH 3
SPEED LP
PDC ON
SELECT :
SET :
EXIT : MENU OK : ENTER
repeatedly until PDC
or to display "ON" for
SP