Cassette Tape Playback - Toshiba SD-22VB User Manual

VCR DVD
AUDIO
TV/VCR AUX
AUDIO SELECT
ZOOM
MEMORY E.A.M
TIMER REC
REC/OTR
RETURN
PLAY
REW
SLOW
STOP
INDEX – SKIP INDEX + TITLE
SET UP
MENU
CH +
VCR MENU
SET – SET +
ENTER
CANCEL CH – VIDEO Plus+
• This VCR selects the playback tape
speed SP or LP automatically.
• The Cassette tape and DVD disc can
be played back simultaneously. If you
press VCR or DVD, the tape playback
and DVD playback alternate with each
other on the screen.
Preparation:
• Turn on the TV, and select the VCR channel on TV.
• Press VCR to select the VCR mode. (The VCR indicator will light)
1
OPEN/CLOSE
CLOCK
2
COUNTER
ANGLE
COUNTER RESET
SUBTITLE
ATR
PLAY MODE
SP/LP
DISPLAY
CALL
To stop playback
FWD
PAUSE/STILL
To rewind the tape or forward it rapidly
A-B RPT
ZERO RETURN
INSTANT SKIP
NTSC video cassette playback

Cassette tape playback

Load a prerecorded tape
(When loading a cassette tape
without the erase prevention
tab, playback will start auto-
matically).
To start playback
Press PLAY.
Playback will start.
If the cassette has not loaded
yet, will blink for 4 seconds.
VCR
S P
H
Press STOP.
VCR
S P
H
Stop the playback or recording with STOP.
To rewind the tape:
Press REW.
To stop the tape-winding, press STOP. To switch to playback
directly (without 3), press PLAY.
Forward/Reverse picture search mode
When the tape is being winded, you can switch to picture search
mode (see next page). To do this, press REW or FWD and hold
it down. The unit will resume the tape winding as soon as the
button is released.
When using a pre-recorded NTSC video cassette tape, the
connected TV set must operate with a 60 Hz vertical frequency.
Otherwise the on-screen picture will be affected by vertical
rolling. Even if your VCR set is capable of processing NTSC video
signals, the picture may be shortened vertically (appearance of
black bars at the top and at the bottom of the TV screen). The
dubbing of a NTSC video cassette tape to a standard PAL VCR
is not possible.
M S
M S
To forward the tape:
Press FWD.
19