Nicam Stereo Recording And Playback - Toshiba SD-22VB User Manual

NICAM Stereo Recording and Playback

This DVD/VCR is capable of recording
sound in Hi-Fi system. The recording
will be performed automatically.
NICAM STEREO broadcasts are
recorded in its original sound system
regardless of the setting. If you wish
to record NICAM programmes, select
NICAM "AUTO" as follows.
VCR DVD
TV/VCR AUX
AUDIO SELECT
ZOOM
MEMORY
TIMER REC
REC/OTR
PLAY
REW
SLOW
STOP
INDEX Ð SKIP INDEX +
SET UP
CH +
VCR MENU
SET Ð
ENTER
CH Ð
CANCEL
Note:
When listening to a stereo broadcast or
playing back a tape Hi-Fi recorded in
stereo, you have to connect the DVD/
VCR with the stereo audio system or the
stereo TV. The sound which is output
from the RF OUT jack is monaural.
32
OPEN/CLOSE
CLOCK
COUNTER
ANGLE
COUNTER RESET
AUDIO SUBTITLE
ATR
PLAY MODE
E.A.M SP/LP
DISPLAY
RETURN CALL
FWD
PAUSE/STILL
TITLE A-B RPT
MENU
ZERO RETURN
SET + INSTANT SKIP
VIDEO Plus+
Preparation:
• Turn ON the TV and select the VCR channel on TV.
• Press VCR to select the VCR mode. (The VCR indicator will light)
NICAM stereo sound reception:
1
Press VCR MENU. Press
or to select VCR SETUP.
Then press ENTER.
2
Press or to select NICAM.
Then press
select [AUTO].
3 Press the VCR MENU repeatedly until the TV picture
appears.
NICAM programmes are divided into 4 types as
shown below.
NICAM STEREO broadcast
"NICAM ST" illuminates when a
NICAM STEREO broadcast signal is
received.
NICAM MONO A broadcast
"NICAM M1" illuminates when a
NICAM MONO A broadcast signal is
received.
NICAM MONO A B broadcast
"NICAM M1/2" illuminates when a
NICAM MONO A and MONO B
broadcast signal is received.
NICAM OFF
It will be displayed for the NICAM
signal when the "NICAM [OFF]" is
selected in menu screen.
SELECT :
ENTER
/ or ENTER to
NICAM ST
NICAM M1
NICAM M1/2
NICAM OFF
TIMER REC SET
AUTO REPEAT [OFF]
VCR SETUP
CHANNEL SETUP
SYSTEM SETUP
: ENTER
MENU
EXIT :
VCR SETUP
NICAM [AUTO]
AUDIO MIX [OFF]
PLAYBACK SHARPNESS
SELECT : /
ENTER : ENTER
EXIT : MENU