All manuals and user guides at all-guides.com Safety Precautions Notes on copyrights: CAUTION It is forbidden by law to copy, broadcast, show, broadcast RISK OF ELECTRIC SHOCK via cable, play in public, or rent copyright material without DO NOT OPEN permission.
Page 3
All manuals and user guides at all-guides.com Safety Precautions(Continued) SOME DOS AND DON'TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
All manuals and user guides at all-guides.com Table of Contents Introduction Recording from External Components ..28 Copying from DVD to VCR....28 Safety Precautions .
All manuals and user guides at all-guides.com Before Use Playable Discs Track (Video CD and audio CD only) Sections of a picture or a musical piece on a video CD or an audio CD. Each track is assigned a track number, enabling you to locate the track you want.
All manuals and user guides at all-guides.com Before Use (Continued) Precautions Cleaning discs Fingerprints and dust on the disc can cause poor pic- Handling the unit ture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the cen- When shipping the unit ter out.
All manuals and user guides at all-guides.com Front Panel Disc Tray (DVD deck) Insert a disc here. Cassette Compartment (VCR deck) Insert a video cassette here. Remote Sensor Point the DVD+VCR remote control here. Display Windows OPEN/CLOSE Opens or closes the disc tray. Pause playback or recording.
All manuals and user guides at all-guides.com Display Window The DVD deck is selected. A disc is in the DVD deck. (Lights when a disc is in the DVD deck and Flashes when no disc.) Indicates repeat mode. DVD+VCR is in timer recording or a timer recording is programmed.(VCR part only) A cassette is in the VCR deck.
All manuals and user guides at all-guides.com Remote Control POWER (I/ / 1 1 ) EJECT, OPEN/CLOSE ( Switches DVD+VCR ON and OFF. - Ejects the tape in the VCR deck. TV/VCR - Opens and closes the disc tray. To view channels selected by the VCR INPUT SELECT/INSTANT REPLAY tuner or by the TV tuner.
All manuals and user guides at all-guides.com Rear Panel AERIAL Connect the aerial using this jack. DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV with video and audio inputs. AUDIO OUT (Left/Right) (DVD EXCLUSIVE OUT) Connect to an amplifier, receiver or stereo system. EURO AV2 DECODER Connect to pay-TV decoder, Set Top Box or another video recorder.
All manuals and user guides at all-guides.com Connections Tips: • Depending on your TV and other equipment there are various ways you can connect the player. • Please refer to the manuals of your TV, VCR, stereo sys- tem or other devices as necessary for additional connec- tion information.
All manuals and user guides at all-guides.com Connections (Continued) Connecting to Optional Equipment Notes: • If the audio format of the digital output does not match the capabilities of your receiver, the receiver Connecting to an amplifier equipped with two chan- will produce a strong, distorted sound or no sound at nel analog stereo or Dolby Pro Logic II/Pro Logic all.
All manuals and user guides at all-guides.com Initial Settings - VCR Initial preset Video channel set For the following steps we do assume that you have Video channel (RF output channel) is the channel on just connected your video recorder for the very first which your TV receives picture and sound signals from time.
All manuals and user guides at all-guides.com Initial Settings - VCR (Continued) How to use the main menu Setting the clock Manually This DVD+VCR can easily be programmed by The clock in your DVD+VCR controls time and using the menus displayed on screen. date settings for your DVD+VCR.
All manuals and user guides at all-guides.com Initial Settings - VCR (Continued) To set the colour system Tuning in TV Stations Automatically If the TV broadcast signal is weak your DVD+VCR 1. Press VCR MENU (i). may not detect the necessary information and will 2.
All manuals and user guides at all-guides.com Initial Settings - VCR (Continued) Tuning in TV Stations Manually 6. Press 2 to select STATION so that you may name your TV station. Press ENTER/OK. In certain areas of the country broadcast signals may be too weak for your DVD+VCR’s automatic tuning process to find or assign TV stations correctly.
All manuals and user guides at all-guides.com Initial Settings - VCR (Continued) Changing the order of TV Stations Deleting TV Stations After tuning TV stations into your DVD+VCR you After tuning TV stations into your DVD+VCR you may wish to change the order in which they are may wish to delete a station.
All manuals and user guides at all-guides.com Initial Settings - DVD By using the Setup menu, you can make various adjust- LANGUAGE ments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things.
All manuals and user guides at all-guides.com Initial Settings - DVD (Continued) DISPLAY AUDIO Each DVD disc has a variety of audio output options. Set this unit’s AUDIO options according to the type of audio system you use. TV Aspect 4:3 : Select when a standard 4:3 TV is connected.
All manuals and user guides at all-guides.com Initial Settings - DVD (Continued) LOCK (Parental Control) Password (Security Code) You can enter or change password. 1. Select “Password” on the LOCK menu then press B. 2. Follow step 2 as shown left column (Rating). To change the password, select the “Change”, press ENTER/OK and input the new 4-digit code then press ENTER/OK.
All manuals and user guides at all-guides.com Initial Settings - DVD (Continued) OTHERS The PBC and Auto Play settings can be changed. Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC.
All manuals and user guides at all-guides.com Operation with tape Playing a tape , Shuttle : 5. Slow motion playback During playing back or still picture press You will only be able to load and eject video cassettes You can reach the following playback speeds. when your DVD+VCR is plugged into the mains.
All manuals and user guides at all-guides.com Operation with tape (Continued) One-touch Timer Recording (OTR) 7. Press PAUSE/STEP (X/C) to avoid recording unwanted scenes. Press PAUSE/STEP (X/C) to continue recording. Your DVD+VCR allows you to make recordings using a variety of simple methods: Tapes can be paused for up to 5 minutes;...
All manuals and user guides at all-guides.com Operation with tape (Continued) Timer recording using On Screen 5. Use the PR/TRK (v/V) to enter the date of the pro- gramme. Display If you press ENTER/OK before entering the date you may select one of the following automated You may set up to seven timer record events recording features.
Page 25
All manuals and user guides at all-guides.com Operation with tape (Continued) Timer recording using On Screen • While you are watching DVD during timer program- ming with PDC On, the unit will go to standby mode when the timer programming ends. This is not a Display (Continued) defect of the unit.
All manuals and user guides at all-guides.com Additional Operation with tape Hi-Fi Stereo Sound System (NIC) On Screen Display (F.OSD) Your DVD+VCR will record and playback Hi-Fi stereo You may easily display the current time or tape counter, sound. In addition it has a stereo NICAM digital stereo amount of tape left, day, month, year, day of week, sound decoder.
All manuals and user guides at all-guides.com Additional Operation with tape (Continued) Video Doctor (Self-Diagnosis) Wide Screen Compatibility 16:9 This feature informs you that there is a problem with your Your DVD+VCR can record and play back wide screen DVD+VCR. These error messages will appear on the TV aspect ratio programmes (16:9).
All manuals and user guides at all-guides.com Additional Operation with tape (Continued) Recording from External Components Copying from DVD to VCR You can copy the contents of a DVD to a VHS tape. You can record from an external component, such as a camcorder or VCR, connected to any of the 1.
All manuals and user guides at all-guides.com Operation with DVD and Video CD Playback Setup General Features 1. Turn on the TV and select the video input source Notes: connected to the DVD+VCR. Unless stated otherwise, all operations described use the remote control.
All manuals and user guides at all-guides.com Operation with DVD and Video CD (Continued) Still Picture and Frame-by-Frame Playback Repeat You can repeat a title/chapter/all/track on a disc. Press REPEAT during playback to select a desired 1. Press PAUSE/STEP (X/C) during playback. repeat mode.
All manuals and user guides at all-guides.com Operation with DVD and Video CD (Continued) Special DVD Features Changing the Audio Channel Press AUDIO repeatedly during playback to hear a Checking the contents of DVD discs: Menus different audio channel (Stereo, Left, Right). DVDs may offer menus that allow you to access special features.
All manuals and user guides at all-guides.com Operation with DVD and Video CD (Continued) On-Screen Display - DVD Maintenance and Service You can display the general playback status on the TV Refer to the information in this chapter before contact- screen.
MP3 formats, prior to the downloading thereof. Toshiba has no right to grant and does not grant permission to ID3 TAG download any copyrighted content.
All manuals and user guides at all-guides.com Playing an Audio CD or MP3 Disc (Continued) Audio CD and MP3 Disc Features Random 1. Press RANDOM during playback. Random Playback Pause begins immediately and “Random” appears on the 1. Press PAUSE/STEP (X/C) during playback. menu screen.
All manuals and user guides at all-guides.com Playing an Audio CD or MP3 Disc (Continued) Programmed Playback Repeat Programmed Tracks 1. Press REPEAT when playing a disc. The repeat icon The program function enables you to store your appears. favourite tracks from any disc in the player memory. A program can contain 30 tracks.
All manuals and user guides at all-guides.com Viewing a JPEG Disc Using this DVD+VCR you can view discs with JPEG Slide Show JPEG files. Use v V b B to highlight the (Slide Show) then 1. Insert a disc and close the tray. The PHOTO menu press ENTER/OK.
All manuals and user guides at all-guides.com Language and Area Code List Language Code List Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Code Language Code Language Code Language Code Abkhazian...
All manuals and user guides at all-guides.com Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Cause Correction Symptom No power. The power cord is disconnected. Plug the power cord into the wall out- let securely.
All manuals and user guides at all-guides.com Troubleshooting (Continued) Symptom Cause Correction An unplayable disc is inserted. Insert a playable disc. (Check the disc The DVD+VCR does not start playback. type and Regional code.) The disc is placed upside down. Place the disc with the playback side down.
All manuals and user guides at all-guides.com Specification General Power requirements AC 200-240V, 50Hz Power consumption Dimensions (approx.) 430 X 78.5 X 265 mm (w/h/d) Mass (approx.) 4.2 kg Operating temperature 5˚C to 35˚C (41˚F to 95˚F) Operating humidity 5 % to 90 % Timer 24 hours display type RF Modulator...
Page 41
All manuals and user guides at all-guides.com 1-47...
Need help?
Do you have a question about the SD-26VESE and is the answer not in the manual?
Questions and answers