Line Connection; Signal Connection - Siemens SIMOTICS S-1FK2 Operating Instructions Manual

Connecting
6.3 System integration
6.3.2

Line connection

Designs of the power connectors
The 1F☐2 is equipped with the following power connectors depending on the frame size and
performance level.
The power connectors can be rotated within a certain range.
More precise information about the equipping of the motors and the angles of rotation is
provided in Chapter "Rotating the connector on the motor (Page 70)".
6.3.3

Signal connection

Signal connector designs
The signal connection of the 1F☐2 is established using a round connector M17.
The connector pin assignment is as follows.
The signal connector can be twisted in a certain range.
72
Round connector M17
Brake connection 24 V: "+" = BD1+; "-" = BD2-
Round connector M23
M17 signal connector, with DRIVE-CLiQ
SIMOTICS S-1FK2 synchronous motors for SINAMICS S120
Round connector M40
1
2
3
4
5
6
7
8
9
10
Operating Instructions, 02/2022, A5E46089564B AD
TX-P
TX-N
-
-
RX-P
RX-N
-
-
24 V
0 V