RFSA-166M
Wireless switch unit
EN
Šestokanalna prekidačka jedinica za kontrolu ventilatora
RS
Characteristics /
Karakterisitke
• Thanks to the 6-channel design of the switching component it can control the heating / cool-
ing mode and with 3 speeds, , the RE6 output channel can be used to control appliances,
sockets or lights.
• The RFSA-166M wireless switching component can be combined with the RFTC-150/G.
• Up to 25 detectors RFWD-100 can be assigned to the switching component.
• The RFWD-100 can be assigned to the RFSA-166M using the PRG button.
• Output Channel RE6:
- Up to 25 channels can be controlled (1 channel represents one button on the controller).
- can be combined with detectors, controllers or system components of iNELS RF Control.
- Function: button, pulse relay and delayed start or return time functions with 2s-60min time
setting.
- Memory status is retained in the event of a power failure.
- The PRG6 programming button on the component also serves as manual control of the RE6
output.
• The package includes an internal antenna AN-I, in case of locating the element in a metal
switchboard, you can use the external antenna AN-E for better signal reception.
• Range up to 100 m (in open space), if the signal is insufficient, use the signal repeater RFRP-20
or protocol component RFIO
that support this feature.
2
• For components it is possible to set the repeater function via the RFAF/USB service device.
• Communication frequency with bidirectional protocol iNELS RF Control
Assembly /
Montaža
mounting into switchboard /
montaža u ormar
Radio frequency signal penetration through various construction materials /
Prenos radio frekvencijskih signala preko različitih građevinskih materijala
60 - 90 %
80 - 95 %
wooden structures
brick walls
with plaster boards
zid od
drvena konstuk-
cigle
cija sa gipsanim
pločama
Made in Czech Republic
2
(RFIO
20 - 60 %
0 - 10 %
reinforced
metal partitions
concrete
metalne pre-
grade
armirani beton
U-Energister, d.o.o.| Noveških interniraca 1V | 31000 Užice | Serbia | e-mail: office@elkoep.rs
U-Energister, d.o.o. | Norveških interniraca 1V | 31000 Užice | Republika Srbija | e-mail: office@elkoep.rs
Support: +381 63 479 880 |
EN
• Zahvaljujući 6- kanalnom dizajnu prekidačka jedinica kontroliše grejanje i hlađenje sa 3
nivoa brzine, RE6 izlazni kanal se može koristiti za kontrolu osvetljenja, utičnica, itd.
• RFSA-166M bežična prekidačka jedinica može se kombinovati sa RFTC-150/G.
• Prekidačkoj jedinici može se dodeliti do 25 detektora RFWD-100
• RFWD-100 može se dodeliti RFSA-166M pomoću PROG tastera.
• Izlazni kanal RE6:
- može se kontrolisati do 25 kanala, može se kombinovati sa detektorima, kontrolerima
ili komponentama iNELS RF kontrole sistema.- lze jej kombinovat s Detektory, Ovladači
nebo Systémovými prvky iNELS RF Control.
- funkcije: taster, impulsni relej i odloženo startno i povratno vreme za 2 s -60 min vremen-
sko podešavanje.
- mogućnost podešavanja statusa memorije u slučaju nestanka struje.
- Taster za programiranje PRG6 na jedinici takođe služi kao ručna kontrola RE6 izlaza.
• Paket uključuje unutrašnju antenu AN-I, u slučaju da se pretvarač nalazi u metalnoj razvod-
noj tabli, možete koristiti spoljnu antenu AN-E za bolji prijem signala.
Za elemente označene kao iNELS RF Control
putem RFAF / USB servisnog uređaja.
• Domet do 100 m (na otvorenom), ako je signal slab između kontrolera i jedinice, koristiti
ponavljač signala RFRP-20 ili komponentu protokola RFIO2 koja podržava ovaj sistem.
2
).
• Frekvencija komunikacije sa dvosmernim protokolom iNELS RF Control
Connection /
80- 90 %
common glass
staklo
Tehnička podrška +381 63 479 880
RS
www.elkoep.rs
(RFIO
), moguće je podesiti funkciju repetitora
2
2
Konekcija
Cool
Heat
N
L
02-12/2018 Rev.0
(RFIO
).
2
2
M
1 / 8
Need help?
Do you have a question about the iNELS RFSA-166M and is the answer not in the manual?
Questions and answers