Casio IT-2000W Technical Reference Manual page 288

Example of Using WINST.EXE
Preparation of necessary files
The table shown below includes files essential for setting up WINST.INF. If, for example, the
application program uses the OBR library, make the following settings for WINST.INF:
UpdateDrivers=yes and UseOBR=yes. Then place OBRLIB.DLL in the same directory as
WINST.EXE/WINST.INF. On a personal computer, WINST.EXE must be executed in the Windows
environment. Windows environment files are stored in the E:
the IT-2000 main unit. First create the Windows directory in the directory in which the prepared files
are stored, then copy the files from the E:
Setup in WINST.INF
UpdateSysCall=yes
UpdateVKD=yes
UpdatePenMouse=yes
UseKeyPad=yes
UseOBR=yes
UseIrDA=yes
UseYMODEM=yes
UseFLINK=yes
Example of execution on personal computer
This is an example method of setting up the Windows environment on a personal computer and
transferring a group of created setup files onto the IT-2000.

Read the essential files from the MASK ROM of the IT-2000.
The files required to run MS-Windows are stored on the MASK ROM drive (E: ) of the IT-2000.
MS-Windows re-writes some of these files when it executes. These files must be copied into a
write-permit drive to rewrite them at start-up. These objective rewrite files are contained in the E:



WINDOWS LOCAL directory together. Usually, before use, they will be copied in the D:
WINDOWS directory. Therefore, if installation is performed on a personal computer, these files
should be loaded onto it. In the following example the E:
loaded on the PC card.


WINDOWS
Essential file
SYSCALL.DLL
VKD.386
PENMOUSE.DRV
PADCTRL.VBX
OBRLIB.DLL
IRDA.DLL
IRCOMM.DRV
COMM.DRV
YMODEM.DLL
FLINK.DLL
288


WINDOWS


LOCAL directory there.
Remark
If executing WINST.EXE on a personal
computer, COMM.DRV must be prepared in
advance. This file is stored in the E:
WINDOWS directory of the IT-2000.
FLINK.DLL will call the IRDA library. The
above mentioned IrDA-related files are required.


WINDOWS


LOCAL directory of






LOCAL files are