Casio IT-2000W Technical Reference Manual page 207

(3) Subsequently, layout the optional controls such as the edit box, etc. properly in the dialog.
Because the size of the IT-2000 display is 384 x 192 (pixel), layout them so that they can
be fit within the range.
Note:


The keypad library will transmit characters to the control which is focused at. Accordingly, if the
focus is placed in other control than the edit box, click on the edit box or move the focus over the
edit box with the program that is using SetFocus(), etc.


Always set "1" to VbProj. If this setup is not made, 2-byte characters can not be transmitted
properly.
Fig. 8.30
207