Flink Utility - Casio IT-2000W Technical Reference Manual

Casio pda technical reference manual
Table of Contents

Advertisement

9.6 FLINK Utility

Overview
The FLINK Utility is used to perform communication either between the IT-2000 and PC, or
between two IT-2000s by means of the IrDA protocol. This utility is provided as DOS application.
It can be called as single command line or as a child process of the application program.
Function
IrDA communication
method setup
File transmission
File reception
File append
File deletion
File move
Idle start
File name:
Startup Method
This utility is supplied on drive (C:). Usually this utility is made available after it is called from the
system menu as a child process. However, it can be used either as a single command or as a child
process to be called from other application.
Operation Method
With this utility operation priority is placed on only one side and the other side must remain in the
command reception wait sate. This is true for both HT-to-HT communication and HT-to-PC
communication. Hereinafter the operation side is referred to as the terminal, and the command
reception wait side is referred to as the host.
To establish HT-to-HT communication, idle-start (host-start) FLINK on one side and specify the
transmission or reception command to execute (terminal-start) FLINK.
To establish HT-to-PC communication, execute the communication host utility called "LMWIN" on
the PC. For information about this communication host utility refer to the IT-2000
Upload/Download Utility Manual.
In the following pages the method used to specify the start options and information about each
function is given.
Sets the IrDA communication method.
Transmits files.
Receives files.
Appends (concatenates) a file on the transmission side to a file on the
reception side.
Deletes a file on the communication partner side.
Moves a file within the same drive on the communication partner side.
Passes the right of communication request to the communication
partner and enters the command reception wait state.
FLINK.EXE
264

Advertisement

Table of Contents
loading

Table of Contents