Wlan Card; Removing The Wlan Card; Installing The Wlan Card - Dell OptiPlex 3000 Thin Client Service Manual

WLAN card

Removing the WLAN card

Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
About this task
The following image indicates the location of the WLAN card and provides a visual representation of the removal procedure.
Steps
1. Remove the screw (M2x3.5) that secures the WLAN card on the system board.
2. Slide and lift the WLAN-card bracket off the WLAN card.
3. Disconnect the WLAN antenna cables from the connectors on the WLAN card.
4. Slide and remove the WLAN card from the WLAN-card slot.

Installing the WLAN card

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
22 Removing and installing components