Installing The Side Cover - Dell OptiPlex 3000 Thin Client Service Manual

Steps
1. Loosen the thumbscrew (6-32) that secures the side cover to the chassis.
2. Slide the side cover towards the front of the computer to disengage the tabs on the side cover from the slots on the
chassis.
3. Lift the side cover away from the chassis.

Installing the side cover

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the side cover and provide a visual representation of the installation procedure.
12 Removing and installing components