Internal Antenna; Removing The Internal Antenna In Location 1 - Dell OptiPlex 3000 Thin Client Service Manual

Steps
1. Align the screws on the heat sink with the screw holders on the system board and place the heat sink on the processor.
2. In sequential order (as indicated by the numbers on the heat sink), tighten the four captive screws that secure the heat sink
to the system board.
Next steps
1. Install the side cover.
2. Follow the procedure in

Internal Antenna

Removing the internal antenna in Location 1

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the WLAN card.
About this task
The following image indicates the location of an internal antenna in location 1 and provides a visual representation of the removal
procedure.
34 Removing and installing components
after working inside your
before working inside your
computer.
computer.