Installing The Internal Antenna In Location 1 - Dell OptiPlex 3000 Thin Client Service Manual

Steps
1. Unroute the black antenna-cable from the routing guides under the system board and from the cable clip.
2. Remove the screw (M3x3) that secures the antenna to the chassis.
3. Lift and remove the antennas and the cables from the chassis.

Installing the internal antenna in Location 1

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of an internal antenna in location 1 and provides a visual representation of the removal
procedure.
Removing and installing components 35