Johnson Controls tyco Kantech IP LINK Installation Manual page 27

Table of Contents

3. Start your web browser and enter the following IP: 192.168.1.2 and press Enter.

4. Enter the IP addresses as per the Network Configuration Information Sheet but do not click on the

Save configuration to IP Link button yet.

5. Remove the wire between PGM2 and IN2 on the IP Link.

6. Click on the Save configuration to IP Link button.

7. When you go to the site with the configured IP Link, you must enter the same details into the

EntraPass workstation.

DN1670-2201

IP Link Installation Manual

Table of Contents

Chapters

Table of Contents

Do you have a question about the tyco Kantech IP LINK and is the answer not in the manual?

Kt-ip Kt-ip-pcb Kt-ip-cab