Johnson Controls tyco Kantech IP LINK Installation Manual page 24

Table of Contents

5. Enter the MAC address of the IP Link then click on Connect.

6. When the IP Link is found, the configuration page displays.

7. Verify your Network Configuration Information Sheet:

•

Enter the EntraPass IP address or the Domain name of the EntraPass Special Edition /

Corporate Gateway. This information must be the same as entered in Procedure 6 Step 11.

Select Obtain an IP address automatically or Use the following IP address but it must be the

same as entered in Procedure 6 Step 10.

DN1670-2201

Table of Contents

Chapters

Table of Contents

Do you have a question about the tyco Kantech IP LINK and is the answer not in the manual?

Kt-ip Kt-ip-pcb Kt-ip-cab