Operations; Listening To A Program Source - Sherwood RX-4109 Operating Instructions Manual

RX-4109(A) 2006.6.21 08:25 AM 페이지 10

Operations

LISTENING TO A PROGRAM SOURCE

.
1
Turn the power on.
.
2
Switch the desired speakers on.
.
3
Select the desired input source.
.
4
Operate the selected component for playback.
.
5
Adjust the volume to a comfortable instening level.
• Then this unit is turned on to enter the
operating mode.
• In the operating mode, when the POWER button on
the front panel or the STANDBY button on the
remote control is pressed, the unit is turned off to
enter the standby mode.
• In the standby mode, the STANDBY indicator lights
up. This means that the receiver is not disconnected
from the AC mains and a small amount of current is
retained to support the memorized contents and
operation readiness.
•Then the corresponding speaker indication("SPK
A(or/and) B" is displayed and the sound can be
heard from the speakers connected to the
selected speaker terminals.
•When using the headphones for private listening,
press the corresponding SPEAKER button to
switch off both A and B speakers.
•Each time the FM/AM button is pressed, the band
is changed to AM or FM.
10