Werner A114002 Operation And Instruction Manual

Werner A114002 Operation And Instruction Manual

Roller sling

Advertisement

Quick Links

OPERATION AND INSTRUCTION MANUAL
ROLLER SLING
Model: A114002, A114003, A114006

WARNING:

ALL USERS OF THIS EQUIPMENT MUST READ AND
UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY
RESULT IN SERIOUS INJURY OR DEATH. USERS SHOULD BE
FAMILIAR WITH PERTINENT REGULATIONS GOVERNING THIS
EQUIPMENT. ALL USERS OF THIS PRODUCT MUST BE PROPERLY
INSTRUCTED ON HOW TO USE THE DEVICE. AVOID CONTACT
WITH PHYSICAL HAZARDS (THERMAL, CHEMICAL, ELECTRICAL,
ETC.). MAKE ONLY COMPATIBLE CONNECTIONS.
V1.4-C

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A114002 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Werner A114002

  • Page 1 OPERATION AND INSTRUCTION MANUAL ROLLER SLING Model: A114002, A114003, A114006 WARNING: ALL USERS OF THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS SHOULD BE FAMILIAR WITH PERTINENT REGULATIONS GOVERNING THIS EQUIPMENT.
  • Page 2 PURPOSE The A114002, A114003, A114006 are anchorage connectors designed to function as an interface between the anchorage and a fall arrest, work positioning, rope access, or rescue system for the purpose of coupling the system to the anchorage. Any references to “anchorage connector” in this manual include, and apply to, the A114002, A114003, A114006.
  • Page 3 Model: Roller Sling 2 inches 1 inch 24 inches / 36 inches / 72 inches 7 / 14 / 33 rollers Ball Bearing Wheel Spherical Spacer 1.85 inches Ø .25 inch Ø 1 inch Ø .30 inch Ø Wheel PERFORMANCE: REGULATORY COMPLIANCE: Minimum Breaking Strength (MBS): ANSI Z359.18 Type A, ANSI Z359.7(19),...
  • Page 4 VERTICAL ANCHOR Only make compatible connections! Due to the risk of improper loading, roller sling terminations must not be connected to each other by a single snaphook. Only OSHA compatible connections, such as a Y-lanyard or Werner A100303 , are permitted.
  • Page 5 WORK SURFACE WORK SURFACE *All products subjected to fall arresting forces should be removed from service immediately! MINIMUM CLEARANCE 2 feet (.6m) DECK/FLOOR/GROUND LEVEL...
  • Page 6 WARNING LABEL LOCATION: DO NOT REMOVE WARNING LABEL!
  • Page 7 MAINTENANCE, CLEANING AND STORAGE Cleaning periodically will prolong the life and proper functioning of the product. The frequency of cleaning should be determined by inspection and by severity of the environment. Clean with compressed air and/or a stiff brush using plain water or a mild soap and water solution. Do not use any corrosive chemicals that could damage the product.
  • Page 8 Werner Co. 93 Werner Road Greenville, PA 16125 1(888) 523-3371 / www.wernerco.com P/N 124587-01 REV B 4/21...

This manual is also suitable for:

A114003A114006

Table of Contents