Selecting The On-Screen Display Language; Selecting The Video Input System Mode (S-Video Or Video Mode Only) - Sharp XV-Z7000U Operation Manual

Selecting the On-screen Display Language

Projector
ON/OFF
LAMP
POWER
TEMP.
KEYSTONE
INPUT PICT MODE
BACK ENTER MENU
(GUI) On-screen Display

Selecting the Video Input System Mode (S-VIDEO or VIDEO mode only)

Projector
ON/OFF
LAMP
POWER
TEMP.
KEYSTONE
INPUT PICT MODE
BACK ENTER MENU
(GUI) On-screen Display
E-23
Remote control
VOL
POWER
2, 3
MUTE
2, 4
BACK
MENU
1, 5
ENTER
Remote control
VOL
POWER
2, 3
MUTE
2, 4
BACK
MENU
1, 5
ENTER
English is the preset language for the On-screen
Display. The language can be set to English, German,
Spanish, Dutch, French, Italian, Swedish, Portuguese,
Chinese, Korean or Japanese.
1 Press MENU.
2 Press ∂/ƒ to select "Language", and then press
ENTER.
3 Press ∂/ƒ to select the desired language.
4 Press ENTER to save the setting. The On-screen
Display is now programed to display in the
language selected.
5 To exit from the GUI, press MENU.
The video input system mode is preset to "Auto";
however, it can be changed to a specific system mode,
if the selected system mode is not compatible with the
connected audiovisual equipment.
1 Press MENU.
2 Press ∂/ƒ to select "Video System", and then
press ENTER.
3 Press ∂/ƒ to select the desired video system
mode.
4 Press ENTER to save the setting.
5 To exit from the GUI, press MENU.
• When the system mode is set to "Auto", you may not receive
a clear picture due to signal differences. Should this occur,
switch to the video system of the source signal.